Module:Location map/data/Australia Victoria/doc

From imedwiki
Jump to navigation Jump to search

This is the documentation page for Module:Location map/data/Australia Victoria


Location map of Victoria
name Victoria
border
coordinates
-33.8
140.6 ←↕→ 150.3
-39.3
map center 36°33′S 145°27′E / 36.55°S 145.45°E / -36.55; 145.45
image Australia Victoria location map.svg
Australia Victoria location map.svg
image1 Australia Victoria relief location map.jpg
Australia Victoria relief location map.jpg
image2 Australia Victoria location map blank.svg
Australia Victoria location map blank.svg
image3 Australia Victoria relief location map blank.png
Australia Victoria relief location map blank.png
image4 Australia Victoria location map highways.svg
Australia Victoria location map highways.svg
Map of Victoria, Australia

Module:Location map/data/Australia Victoria is a location map definition used to overlay markers and labels on an equirectangular projection map of Victoria in Australia. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Australia Victoria":

Map definition

  • name = Victoria
    Name used in the default map caption
  • bottom = -39.3
    Latitude at bottom edge of map, in decimal degrees
  • left = 140.6
    Longitude at left edge of map, in decimal degrees
  • right = 150.3
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The maps displayed as image2 / image3 / image4 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 9.7 degrees.

  • At an image width of 200 pixels, that is 0.0485 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0097 degrees per pixel.

Latitude: from North to South this map definition covers 5.5 degrees.

  • At an image height of 200 pixels, that is 0.0275 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0055 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

Melbourne is located in Victoria
Melbourne
Melbourne
Melbourne (Victoria)
{{Location map | Australia Victoria
| width = 200
| label = Melbourne
| lat_deg=37  | lat_min=48 | lat_sec=49 | lat_dir=S
| lon_deg=144 | lon_min=57 | lon_sec=47 | lon_dir=E
}}

Location map many, using relief map (image1)

Template:Location map many

{{Location map many | Australia Victoria
| relief   = yes
| width    = 200
| caption  = Locations in Victoria
| lat1 = -34.12 | long1 = 141.98 | label1 = Yelta
| lat2 = -39.03 | long2 = 146.32 | label2 = Tidal River
| lat3 = -36.37 | long3 = 140.98 | label3 = Serviceton
| lat4 = -37.55 | long4 = 149.75 | label4 = Mallacoota
}}

Location map+, using AlternativeMap

Location map/data/Australia Victoria/doc is located in Victoria
Yelta
Yelta
Tidal River
Tidal River
Serviceton
Serviceton
Mallacoota
Mallacoota
Locations in Victoria
{{Location map+ | Australia Victoria
| AlternativeMap = Australia Victoria location map highways.svg
| width   = 200
| caption = Locations in Victoria
| places  =
  {{Location map~ | Australia Victoria
  | lat = -34.12 | long = 141.98 | label = Yelta
  }}
  {{Location map~ | Australia Victoria
  | lat = -39.03 | long = 146.32 | label = Tidal River
  }}
  {{Location map~ | Australia Victoria
  | lat = -36.37 | long = 140.98 | label = Serviceton
  }}
  {{Location map~ | Australia Victoria
  | lat = -37.55 | long = 149.75 | label = Mallacoota
  }}
}}

See also

Location map templates

Creating new map definitions